The Definition of the Optimal Energy-Efficient form of the Building
DOI:
https://doi.org/10.14419/ijet.v7i3.2.14611Keywords:
form, geometry model, optimization, solar radiation, thermal radiation.Abstract
We consider the problem of finding a geometrical form of a body in a thermal radiation field, for which the thermal balance between the body and the surrounding air is minimal. The case of a point source of heat is investigated. To consider an analogous problem for buildings, one must know the value of incoming thermal energy to a unit square in relation to its orientation. We develop an application package in MATLAB that represents this relation in table form and takes into consideration the direct, diffuse, ground-reflected solar radiation and the thermal radiation of atmosphere.
Â
Â
References
[1] Dvoretsky A.T., 2001: Geometrical Simulation of the Reflected Power Flows in Solar Thermal Technology (in Russian). Doctor of Science dissertation. KNUBA. Kyiv: p. 325.
[2] Ivanchenko V. T., 2002: Determination of Light Exposure of Housings by Natural Light (in Russian). AVOK-Press, Moscow: p.80.
[3] Harkness E. L., Mehta M. L., 1978: Solar Radiation Control in Buildings. Applied Science Publishers Ltd, London: p.176.
[4] Kondrat'ev K. Ya., 1954: Radiant Energy of the Sun (in Russian). Gidrometeoizdat, Leningrad: pp. 560.
[5] Kruglova A. I, 1970. Climate and Protecting Design (in Russian). Stroyizdat, Moscow: p.167.
[6] Markus T. A., Morris E. N., 1980: Buildings, Climate and Energy. Pitman Publishing, S.Lo, Canada: p.540.
[7] Matveev L. T, 2000: Course of General Meteorology. Physics of Atmosphere (in Russian). GIMIZ, St.-Petersburg: p.778.
[8] Pidgorny O. L., 2004: Geometry of solar irradiation and problems of architectural designing and solar engineering (in Ukrainian). In: “Geometrical and computer modeling: energy saving, ecology, design. Proceedings of the 1-st Scientific-Practical Conference. KNUTD. Kyiv: pp. 9-13.
[9] Podgorny A. L., 1981: To the problem of automation of insolation calculations (in Russian). In: “The Applied Geometry and Engineering Graphicsâ€, V. 31. Budivel'nik. Kyiv: pp.12-15.
[10] Podgorny A. L., Martynov V. L, 1992: Determination of the optimum angle of slope of a solar collector plane for a given azimuth (in Russian). In: “The Applied Geometry and Engineering Graphicsâ€, V. 53. Budivel'nik. Kyiv: pp. 8-12.
[11] Podgorny A. L., 1998: To the question of geometrical modeling of priority of temperature maturing of soils (in Russion). In: “Papers of the Taurian State Agrotechnical Academy. - Issue 4. The Applied Geometry and Engineering Graphics. V. 2. ТGÐТÐ. Melitopol: pp. 22-24.
[12] Pugachov E.V., 2006: Insolation and an irradiation of a ramp with regards to probability of solar light (in Ukrainian). In: “Geometrical and computer modeling: energy saving, ecology, design. Proceedings of the 3-rd Scientific-Practical Conference. KNUTD. Kyiv: pp. 133-137.
[13] Sergeychuk O.V., 2005: Bodies of the minimum area inscribed in a cone (in Russian). In: “Modern problems of geometrical modeling. Proceedings of the Ukrainian-Russian Scientific-Practical Conferenceâ€. Kharkov: p. 245-250.
[14] Tabunshcikov Yu. A., 1992: Mathematical Models of Thermal Conditions in Buildings. Taylor & Francis Ltd., Hardback: p. 240.
[15] Tabunschikov, Yu. , Brodatch, M., 2002. Mathematical Modeling and Optimization of Thermal Efficiency of Buildings (in Russian). AVOK-Press, Moscow: p. 194.
[16] Tabunshcikov Yu. A., Brodach M. M., Shinkin N. V., 2003: Energy-efficient Buildings (in Russian). AVOK-Press, Moscow: pp. 200.
Twarowski M., 1970: The Sun in Architecture (in Poland). Arcady. Warsaw: pp. 296.
Downloads
How to Cite
Received date: June 23, 2018
Accepted date: June 23, 2018
Published date: June 20, 2018