Developing A Method for Estimation of Tightness Based on Calibration Characteristics

Authors

  • Yu.S. Asadova
  • M.V. Nemenko
  • A.M. Volodina

How to Cite

Asadova, Y., Nemenko, M., & Volodina, A. (2018). Developing A Method for Estimation of Tightness Based on Calibration Characteristics. International Journal of Engineering and Technology, 7(4.36), 25-28. https://doi.org/10.14419/ijet.v7i4.36.22706

Received date: December 1, 2018

Accepted date: December 1, 2018

Published date: December 1, 2018

DOI:

https://doi.org/10.14419/ijet.v7i4.36.22706

Abstract

This article discusses methods of assessing tightness of mass-produced products. In order to reduce errors in the calibration of gas analytical leak detectors, a method is proposed which is based on transferring a certain number of molecules from the measuring chamber. This is done by means of a throttle device called frequency resistance. Based on the tests performed, results of the study are displayed.

References

  1. [1] Kushnir A.P. Simulation of passing through the armor // Russian Technological Journal, 2015. No. 4, V.2, P. 116–126.

    [2] Non-Destructive Testing: A Handbook. Under total ed. V.V. Klyuev. T.2. KN. 1.//M .: Mechanical Engineering, 2003. p. 181.

    [3] Calibration method for gas analytic leak detector: Pat. 2329807 Ros.Federation: G01M3 / 02 / L.B. Leonov; the applicant. - No. 2002111643/28; declare May 6, 2002; publ. 01/27/2004

    [4] A device for increasing the level of sensitivity in monitoring the tightness of a non-contact acoustic gas method and calibrating the lower response threshold of leak detection equipment: Pat.159781 Ros.Federation: IPC G01M 3/24 (2006.01) / Yu.N. Moiseev, P.S. Sumkin; applicant and patent holder. - No. 2014138152/28; declare 09/22/2014; publ .: 20.02.2016 Bull. â„– 5

    [5] Leibniz E., Shtrupe H.G. Gas Chromatography Guide. Part 2 // M .: Mir, 2010. p. 510

    [6] Evlampiev A.I., Popov E.D., Sazhin S.G., Sumkin P.S. Leak detection // M .: Spectrum, 2011-208 p.

    [7] Kvasnikov I.A. Molecular Physics. / / M .: Editorial URSS, 2009. S. 56.

    [8] Mordasov M.M., Trofimov A.V. Analysis and synthesis of pneumatic devices. / / M .: Mashinostroenie-1, 2005. P. 20

    [9] Vilesov A.V., Ivchenko V.D. Decomposition of the unified automated monitoring system into functional modules // Russian Technological Journal, 2013. â„– 1, P. 198-203.

    [10] Makarov, VA, Asadova, Yu.S., Tyutyaev, R.Ye. Frequency methods for calibrating means of monitoring leak tightness // Proceedings of higher educational institutions. Engineering. 2016. â„– 10 (679). Pp. 57-63.

    [11] Makarov, V.A., Asadova, Yu.S., Tyutyaev, R.E. Industry Standard for the Manometric Method of Tightness Monitoring // Izvestiya Vysshikh Uchebnykh Zavedenii. Engineering. 2016. â„– 9 (678). Pp. 31-38.

Downloads

How to Cite

Asadova, Y., Nemenko, M., & Volodina, A. (2018). Developing A Method for Estimation of Tightness Based on Calibration Characteristics. International Journal of Engineering and Technology, 7(4.36), 25-28. https://doi.org/10.14419/ijet.v7i4.36.22706

Received date: December 1, 2018

Accepted date: December 1, 2018

Published date: December 1, 2018