Utilization manufactured sand as fine aggregate for concrete quality
DOI:
https://doi.org/10.14419/ijet.v7i3.29.19316Keywords:
M-Sand, Fine Aggregate, Waste, Compressive Strength, Concrete Quality.Abstract
Utilization Manufactured sand (M-sand) in this case of ash sandstone wash as a substitute for sand on concrete mixture is used as a result of the crisis in availability of the main material of concrete, ie natural materials such as sand used in concrete manufacture foundries. M-sand from the production of crushed stone then collected and washed which will be used as a mixture of sand on the concrete. The results of m-sand optimally utilized for the mixture of fine agregate substitution of concrete with compressive strength test to produce high quality of concrete. The mixture used is 50% m-sand and FA, from the results of the compressive strength test showed the utilization of m-sand can be used as a quality concrete
Â
Â
References
[1] W. Shen et al., “Mixing design and microstructure of ultra-high strength concrete with manufactured sand,†Constr. Build. Mater. vol. 143, pp. 312–321, 2017.
[2] R. Hidayawanti, S. Legino, and D. Harjanto, “OPTIMIZING THE UTILIZATION CEMENT SLAG AND FLY ASH OF,†no. March, pp. 14–18, 2018.
[3] W. Shen et al., “Influence of manufactured sand’s characteristics on its concrete performance,†Constr. Build. Mater. vol. 172, pp. 574–583, 2018.
[4] R. Siddique, G. de Schutter, and A. Noumowe, “Effect of used-foundry sand on the mechanical properties of concrete,†Constr. Build. Mater. vol. 23, no. 2, pp. 976–980, 2009.
[5] R. Siddique and G. Singh, “Utilization of waste foundry sand (WFS) in concrete manufacturing,†Resour. Conserv. Recycl. vol. 55, no. 11, pp. 885–892, 2011.
[6] P. Nanthagopalan and M. Santhanam, “Fresh and hardened properties of self-compacting concrete produced with manufactured sand,†Cem. Concr. Compos. vol. 33, no. 3, pp. 353–358, 2011.
[7] R. N. U. Shanmugapriya T., “Optimization of Partial Replacement of M-Sand by Natural Sand in High Performance Concrete with Silica Fume,†Int. J. Eng. Sci. Emerg. Technol., vol. 2, no. July, pp. 73–80, 2012.
[8] M. Padmanabhan and P. H. Paulose, “Behaviour of Concrete Made by Partially Replacing Fine Aggregate with Foundry Sand and Quarry Dust,†pp. 3279–3282, 2018.
[9] M. Popek and Å. Sadowski, “Effect of selected mineral admixtures on mechanical properties of concrete,†Key Eng. Mater., vol. 728, 2017.
[10] R. Siddique, G. Singh, and M. Singh, “Recycle option for metallurgical by-product (Spent Foundry Sand) in green concrete for sustainable construction,†J. Clean. Prod., vol. 172, pp. 1111–1120, 2018.
[11] J. A. Mary, “An Experimental Investigation on Stone Dust as Partial Replacement of Fine Aggregate in Concrete,†vol. 3, no. 5, pp. 229–232, 2014.
[12] K. Praveen Kumar and Radhakrishna, “Characteristics of SCC with Fly Ash and Manufactured Sand,†IOP Conf. Ser. Mater. Sci. Eng., vol. 149, no. 1, p. 012111, Sep. 2016.
Downloads
How to Cite
Received date: September 9, 2018
Accepted date: September 9, 2018