Ladder shaped RF mems switch for wireless application
DOI:
https://doi.org/10.14419/ijet.v7i2.33.15551Keywords:
Actuation Voltage, Cantilever Beam, Insertion Loss, Isolation Loss, RF MEMSAbstract
This paper analyses the different position of actuation electrode in an inline ladder shaped cantilever beam Radio Frequency (RF) Microelec-tromechanical System (MEMS) switch, which shows very good RF parameters over the range of (0-50) GHz along with low actuation voltage. The switch is designed and simulated by software Intellisuite 8.7v for electromechanical analysis and by EM software for RF anal-ysis. From the simulated results, they obtained a low actuation voltage (2 V). It shows a very less insertion loss -0.008 dB at 8 GHz and high isolation loss –100 dB at 8 GHz.
Â
References
[1] Jau Tai Wen, “RF MEMS Switches: High-Frequency Performance and Hot-Switching Reliabilityâ€, High Frequency Electronics, Vol.5 No.8 (2017).
[2] Saffari, Moghadam and Tahmasebipour (2017), “Low Actuation Voltage RF MEMS capacitive switch based rotated serpentine spring,†25th Iranian Conference on Electrical Engineering (ICEE).
[3] Khan and Shanmuganantham (2018), “Design and Analysis of RF MEMS cantilever switches for Parameter Enhancement,†Transaction on Electrical and Electronics Materials (TRANSEEM), in press.
[4] Kageyama, Shinozaki, et al, (2017), “An Ohmic Contact type RF MEMS switch having Au-Au/CNTs contacts†12th IEEE International Conference on Nano/Micro Engineered Molecular System, Los Angeles, USA.
[5] Ibrahim, Batmanov and Burte (2017), “Design of Reconfigurable Antenna Using RF MEMS switch for Cognitive Radio Application,†Progress in Electromagnetic Research Symposium, Springer, St Petersburg.
[6] Raman and Shanmuganantham (2017), “Frequency Reconfiguration of Microstrip Patch Antenna with Serpentine Spring Shaped RF MEMS Switch,†International Journal of Advanced in Microwave Technology (IJAMT), vol.2 No.1.
[7] Khan and Shanmuganantham (2017), “ Y- Shaped cantilever beam RF MEMS switch for Lower the Actuation Voltage,†International Conference on Communication, Networks and Computing (CNC-2018), in press.
[8] Rebeiz and Muldavin (2001), “RF MEMS switches and switch circuits,†IEEE Microwave Magazine, pp (59-71).
[9] G. Rebeiz, “RF MEMS Theory, Design and Technologyâ€, New Jersey, J.Wiley Sons, (2003).
Downloads
How to Cite
Received date: July 13, 2018
Accepted date: July 13, 2018
Published date: June 8, 2018